NJ1.5-18GM-E2-D, BES 516-300-S 164-S 4-D, BES 516-300-S 163-S 4-D, BES 516-300-S 242-S 4-D, BES 516-300-S 300-S 4-D, BES 516-300-S 298-S 4-D, BES 516-300-S 135-S 4-D, BES 516-300-S 162-S 4-D , BES 516-300-S 281-S 4-D, BES 516-300-S 265-S 4-D, BES 516-300-S 249-S 4-D, BES 516-300-S 263-S 4 -D, BES 516-300-S 262-S 4-D, BES 516-300-S 164-D-PU, BES 516-300-S 135-D-PU, BES 516-300-S 178-D- PU, BES 516-300-S 240-D-PU, BES 516-300-S 241-D-PU, BES 516-300-S 215-D-PU, BES 516-300-S 205-D-PU, BES 516-300-S 152-S 4-D, BES 516-300-S 149-S 4-D, BES 516-300-S 156-S 4-D, BES 516-300-S 149-D-PU , BES 516-300-S 284-S 4-D, BES 516-300-S 284-D-PU, BES 516-300-S 129-S 4-D, BES 516-300-S 128-S 4 - D, BES 516-300-S 267-S 4, BES 516-300-S 144-S 4-D, BES 516-300-S 299-S 4-D, BES 516-300-S 203, BES 516 - 300-S 190-S 4, BES 516-300-S 271-S 4, BES 516-300-S 271, BES 516-300-S 260-S 4-D, BES 516-324-SA 17, BES 516 -300-S 289-B0-D-PU, BES 516-300-S 292-B0-D-PU, BES 516-300-S 290-B0-D-PU, BES 516-300-S 293-B0- D-PU, BES 516-300-S 270-S 4-D, BES 516-300-S 291-S 4-D, BES 516-325-SA 53, BES 516-370-SA-9-E5-YS 4, BES 516-325-SA 19, BES 516-329-SA 14-A0-X, BES 516-326-SA 23 
 DW-AS-501-P20, DW-AS-503-P20, DW-AD-501-P20, DW-AD-503-P20, DW-AS-501-P18, DW-AS-503-P18, DW- AS-501-P12-624, DW-AS-503-P12-624, DW-AS-501-P12-630, DW-AS-503-P12-630, DW-AS-501-P12, DW-AS- 503-P12, DW-AS-504-P12, DW-AS-501-P12-627, DW-AS-503-P12-627, DW-AS-501-P12-621, DW-AS-503-P12- 621, DW-AS-501-P12-635, DW-AS-503-P12-635, DW-AS-501-P12-622, DW-AS-503-P12-622, DW-AS-501-P12- 639, DW-AS-503-P12-639, DW-AS-501-P12-625, DW-AS-503-P12-625 

 Switch Terminology 

 Distance: distance movement is detected when the body moves a certain way, from the base location (proximity switch sensing surface) to the switching position when measured base to the detection plane distance. Rated operating distance from the switching means close to the nominal value. 
 Setting distance: close to the switch in the actual work setting distance, usually 0.8 times the rated operating distance. 
 Back to the difference: the action and reset the distance between the absolute distance. ÷ 
 Standard test body: to compare the proximity switch can detect metal body. The company uses the test body for the square of the A3 steel, thickness of 1mm, the use of side length is close to 2.5 times the switching of the detection plane. 
 Output state: normally open and normally closed points. When no detection of objects, normally open switches are connected close to the load, as close to the switch's internal output transistor cut-off instead of working, when an object is detected, the transistor, the load is energized work. Detection method: sub submerged and non submerged. Embedded proximity switch installed on the flush-mounted type, with installation of metal objects to form the same surface, non-submerged proximity sensor switches need to head out to achieve its long sensing range of purposes. Frequency response: According to the provisions of the 1 second interval, close to the switching cycles. Conduction voltage drop: either switch turns on, switching the output transistors on the left in the voltage drop can be customized according to customer requirements threaded shell, pressure 60MP, instant impact strength 50MPA, beautiful appearance of the product, quality assurance, performance and stability directly can replace foreign brands in Germany Pepperl + Fuchs (PEPPERL + FUCHS), Germany Turck (TURCK), Germany Balluff (BALLUFF) and Switzerland Corey (CONTRINEX) 

 Please call 021-28041138 or add QQ1850553580 Li Gong